So it’s pretty simple Guys and Gals. No matter what you drive, you need the following three parts.
So after Neil received his authentic parts from DRIVENRG.com he got them into the car right away. Well Neil ran into a small problem when installing the quick release and trying to get the horn work properly. We all know that when adding bolt-ons to your car, sometimes you have to improvise and make it work. It doesn’t work right out of the box every single time. The problem at hand was that GM used a spring and plunger style switch to close the contacts for horn on the stock setup. Normally we hook up a couple wires, make a ground connection and beep beep we have a horn!
Here are the spring and pin that make the switch inside of the tube.
And then, he had a great question: WHAT ARE THOSE! We get this question a lot and nine times out of ten these shims go into the trash. Some people use them to make a ground connection for the horn, but most people toss them out.
Once again after a little bit of research he found his own solution online or at your local auto parts store. The Dorman Universal Horn Wire kit allowed Neil to install his horn and function like it always has without any heavy modification.
If you look closely you can tell that the spring on the end of the wire goes into the stock location inside of the tube that we talked about above.
Neil took my recommendation on a Gen 2.5 Quick Release and you can see the simple wire conversion installed here onto the back of the horn button. He was super happy with the test fit and it was time to get the wheel installed.
Neil opted for a 380mm OMP wheel to complete his setup. With function in mind, the larger wheel allows a full view of his gauge cluster on the dash. He had his eye on a 350mm RST-023MB-R but went with the advice of his Pro Touring buddies for the larger wheel which is also closer to original wheel size.
We can’t be mad about the wheel, it’s all about what best for your ride and how you drive. The car looks great and so does his setup. A special BIG thanks to Neil “OCDCAMARO” for taking the time to help the Pro Touring, muscle car and hot rod community and for educating us here at DRIVENRG so that we can better serve you all as a customer. You can view Neil’s full Vlog of the install here: https://youtu.be/FzpPJQw_OVs
]]>
NEW Race Seats & Racing Harnesses available to customize your interior.
Steering wheel heaven!
Plenty of jaw dropping builds in attendance.
]]>
Photo @emotiveimage
Odi Bakchis signature series Steering Wheel
Purchase your Odi Bakchis signature series steering wheel here:
https://drivenrg.com/search?q=odi+bakchis
Fun fact: Ryan loves #Forzamotorsports and can "litterally" slay it like he does in video games. Forza breeds real drivers!
The SK-500 Stealth Shift Knob also features a secret compartment on the top of the shift knob. Allowing users to remove the cap from the top, and place goodies or small items within the shift knob itself. Take note, this is only applicable when the shift knob is fully extended upward.
Here is the Stealth Shift Knob installed inside a Nissan 240SX S13 by FRSport.
Locked and ready to go!
The SK-500 at full extension. This setting may cater more to the racer for a quicker reach to the gearbox, allowing for a faster shift engagement during a race. With so much going on in the cockpit during a race, precious seconds can make a huge improvement!
Perfect height to engage each gear.
The SK-500 Stealth Shift Knob is a perfect addition to any vehicles interior. With matching style and performance, it's difficult to say no to such an innovative product!
Choose from a variety of SK-500 shift knobs here: Stealth Style Shift Knob
]]>
This stylish S13 checks off all the boxes!
Steering Wheel & Quick Release setups:
For more product updates, events, and tips on install, please follow our blog!
Follow our Instagram @drivenrg for more related post and special offers!
]]>